Audio Database
FCS-250
Commentary

A 2-way bookshelf speaker system that employs an air suspension system.

A 25 cm cone type woofer is installed in the low range.
The smaller the volume of the speaker, the higher fo and Qo, making it impossible to play in the low-frequency range. On the other hand, in FCS-250, the larger the mass of the vibration system of the woofer used is, the lower fo is kept sufficiently low, and the optimum value of Qo (≒ 0.7) is set by an appropriate magnetic circuit design.

An 8 cm cone type tweeter is installed in the high range.
This unit uses the roll-edge method to suppress distortion, and the crossover frequency is set low to avoid the adverse effect of split vibration of the woofer.

The enclosure uses an air suspension system.
This system is a sealed structure, and by supporting the vibration system of the woofer by the stiffness of the air in the enclosure, excellent transient characteristics and distortion characteristics are obtained up to the lowest sound range.
The exterior has a walnut oil finish.

Model Rating
Method 2-way, 2-speaker, air suspension system
・ Bookshelf type
Units Used For low band : 25 cm cone type
For high pass : 8 cm cone type
Impedance 8 Ω
Frequency characteristic 50 Hz to 20 kHz
Output sound pressure level 95dB/W
Max Input 30W
Crossover frequency 1kHz
External dimensions Width 320x Height 597x Depth 300 mm
Weight 15kg