Audio Database

The

DYNACO SE-10
125,000yen(around the 1977 time)

Description
@
The audio equalizer which rectifies the frequency response which divides an audio frequency zone into ten and a system has.

The peculiar peculiarity of the component currently used was decreased and the room acoustic is rectified.
Moreover, it can be used also at the time of recording and can cut down on coloring sound quality.

- The right-and-left independent gain control from 12dB to +6dB is adopted, and it has become the design to which a full boost does not make distortion increase, either.

The equalizer is using the exact frequency response and the active network which realizes a high S/N ratio.

The changeover switch of the source tape is giving the same role as the monitor switch of a preamplifier.


Rating of a mode
Form Audio equalizer
Variable frequency 30Hz, 60Hz, 120Hz, 240Hz, 480Hz, 960Hz
1.9kHz, 3.8kHz, 7.7kHz, 15kHz (}12dB)
Output voltage 8V (maximum)
THD 0.04% or less
Cross modulation distortion 0.02% or less
Frequency response 10Hz-35kHz}1dB (equalizer 0dB o'clock)
Profit - A 12-+6dB continuation variable
Signal to noise ratio 85dB
Input impedance 50kohm
Output load impedance 600ohms
Input terminal Tape Monitor, Line1, 2
Output terminal Tape out, Line1, 2
Dimensions Width 343x height 108x depth of 267mm
Weight 4.3kg