Audio Database

DP-70L
Commentary

An auto lift player equipped with an auto lift mechanism using a contact-free end sensor.

Equipped with lifter speed control function, the lowering speed of the arm can be freely adjusted.

Uses a double-structured turntable.

An out Rocester type AC servo motor is used as the drive motor.

The tone arm is equipped with a high-sensitivity S-shaped tone arm with dynamic damping mechanism that is not affected by external vibration.

Equipped with a helicoidal arm elevation mechanism, the height of the tone arm can be adjusted according to the cartridge.

A 70 mm thick heavyweight cabinet has been adopted.

Model Rating
Type Auto lift player
Phono Motor Section
Motor Out rotor AC servo motor
Speed control Speed servo and phase servo by frequency detection
(Speed Servo Only at Speed ADJ)
Number of revolutions 33 1/3, 45 rpm (± 6% adjustable)
Wow and flutter 0.015% W. rms or less (DENON measurement method)
0.02% W. rms or Less (JIS Measurement Method)
Rotational speed deviation 0.002% or less
Speed switching mechanism Soft Touch Push Button Type
Signal-to-noise ratio 80 dB or more (DIN-B)
Startup time Within 1.6 Seconds (33 1/3)
Load characteristic 0% (Needle Pressure 150g Outer Circumference)
Voltage characteristic 0% for 90 ~ 110 V
Brake Electronic
Turntable Top : Zinc Die-cast 30.8 cm
Bottom : Aluminum Die-cast
Moment of inertia 370 kg / cm2(including turntable seats)
Arm Section
Type Static Balance S-shaped Universal with Dynamic Damping Mechanism
Electronic control auto lift mechanism with lifter switch (Down speed adjustable)
Effective length 244mm
Overhang 14mm
Tracking error 2.5 degrees or less
Needle pressure control 1 Rotation 2.5g (1 Scale 0.1g)
Applicable Cartridge Dead Weight Approximately 13 ~ 19g (including shell, etc.)
Shell 9g (Equivalent to PCL-4)
Height adjustment Approx. 9 mm (Helicoid Type)
Output code Low Capacity Cord Approx. 1.2m
Attachment mechanism Contactless anti-skating mechanism
<General>
Cabinet Bubinga natural wood 貼仕 High density particle board 70 mm thick stack
Power consumption 15W
External dimensions Width 490x Height 161x Depth 444 mm
Weight Approx. 16 kg