DENON DP-32F
¥ 59,800 (around 1981)
Commentary
Uses an electronic Q-dump light mass straight arm.
Tone arm float.
Contactless electronic servo arm equipped with microprocessor.
With electronic anti-skating.
With electronic brake.
Model Rating
| Type | Full auto player |
| Phono Motor Section | |
| Motor | Linear drive MF motor |
| Speed control | Two way servo DENON quartz |
| Number of revolutions | 33 1/3, 45 rpm |
| Wow and flutter | 0.012 (0.02)% w. rms or less |
| Rotational speed deviation | 0.002% or less |
| Signal-to-noise ratio | 78 dB or more |
| Startup time | Within 2 Seconds (33 1/3) |
| Load characteristic | 0% (Needle Pressure 80g Outer Circumference) |
| Voltage characteristic | 0% for 90 ~ 110 V |
| Turntable | Aluminum Die-cast 30.8 cm |
| Arm Section | |
| Type | Static Balance with Damping, Shell Replacement Straight Type |
| Effective length | 220mm |
| Overhang | 16mm |
| Needle pressure control | 1 Rotation 2.5g (1 Scale 0.1g) |
| Applicable Cartridge Dead Weight | Approximately 4-9g |
| Shell | PCL-30 : About 3.3g |
| <Cartridge (DL-32)> | |
| Output voltage | 0.3mV |
| Playback frequency | 20 Hz to 40 kHz |
| Needle pressure | 1.8 ± 0.3g |
| Compliance | 8x10-6cm/dyne |
| Needle exchange | Main Unit ¥ 8,000 |
| <General> | |
| Cabinet | Special hard resin |
| Power consumption | 6W |
| External dimensions | Width 424x Height 130x Depth 388 mm |
| Weight | Approx. 6 kg |