DENON DN-C635

Commentary

Professional CD player with balanced output and serial / parallel remote terminals.

Equipped with a sleep mode that reduces the burden on the CD mechanism when power is turned on for a long time.

It is equipped with an instant start function that enables instantaneous sound output.

The frame search function enables frame-by-frame searching and head-tracking, and the track select knob enables easy track selection.

Pitch control of ± 12% is possible with the pitch slider.

It is equipped with an end monitor function that plays only the end portion of the track and an end of message (EOM) function that signals the end of the track.

Up to 99 songs can be played.

Equipped with a shock proof memory of 10 seconds.

There was a wired remote control sold separately as an option.

Model Rating

Type	CD Player
Number of channels	2-channel stereo
Available disk	CD-DA, CD-R, CD-RW (12 cm, 8 cm)
Number of quantization bits	16bit
Sampling frequency	44.1 kHz (normal pitch)
Digital filter	8 x Oversampling
Reproduction frequency characteristic	5 Hz to 20 kHz
Signal-to-noise ratio	104dB
Total harmonic distortion factor	0.004%
Dynamic range	100dB
Channel separation	90dB
Line out output level	Balance : + 18 dBu (600 ohm load)
Output level variable range	Balance : + 22 dBu ~ -20dBu
Line out output level	Unbalanced : 2.0 Vrms (10k Ω load)
Digital output	IEC-958 Type2
Headphone out	Stereo
Remote terminal	9P D-sub connector (serial) 25p D-sub connector (parallel)
Pwer	100 VAC ± 10%, 50Hz/60Hz
Power consumption	11W
External dimensions	Width 482x Height 88x Depth 252 mm
Weight	4.7kg
Attachment	Wired Controller RC680 (discretionary price)