DENON DN-1100R

Commentary

A professional MD deck equipped with functions that can be used for DJ play, etc.

Equipped with a hot start function, you can play any song up to 10 songs seamlessly one after another by inputting 10 keys.
The 10-key preset can be used for each track or all tracks can be exchanged. Since it starts up with little time lag, it can be used as a DJ sampler.

Both input and output terminals are equipped with RCA pin terminals and balance terminals, and can be easily selected by switching the input on the front.
A coaxial digital input is also installed as a digital input.

It is equipped with an instant recording function, and recording starts almost simultaneously with the recording start operation.
It is possible to record the part of the target part, etc., and to record at precise timing without cutting off the head.

It is possible to start at the frame unit, and it is possible to start at the preset time with the hot start function and to start at the accurate 1/75 second unit when editing.

Equipped with a pre-U-TOC system, even if the power supply is turned off due to a power failure during recording, the recorded contents and TOC information are retained in the disk to prevent disk errors.

It is equipped with editing functions such as divide, combine, move, erase and so on that are unique to MD.

You can enter information such as disc titles using alphabets, numbers and symbols.
With a maximum of 254 characters per information, about 1700 characters of information can be written on each disc.

Rack mount is supported.

Model Rating

Type	MD deck
Play	Premaster disk, recordable MD
Recording	Recordable MD
Read method	Non-contact optical (semiconductor laser used)
Voice compression system	ATRAC(Adaptive TRansform Acoustic Coding)
Recording and playback time	Up to 74 minutes
Sampling frequency	44.1kHz
Analog balance input	XLR connector Input level : + 18 dBm Input impedance : 600 Ω
Analog unbalanced input	RCA jack Reference input level : 500 mVrms Minimum input level : 125 mVrms Input impedance : 47k Ω or more
Analog balance output	XLR connector Output level : + 18 dBm (load resistance 600 Ω) Output Impedance : Low Impedance
Analog unbalanced output	RCA jack Output level : 2 Vrms (load resistance 10k Ω) Output Impedance : Low Impedance
Digital input	Unbalanced transmission RCA jack Input Level : 0.5Vp-p
<Playback Audio Performance>
Frequency characteristic	20 Hz to 20 kHz + 0.5 -1.0 dB
Total harmonic distortion factor	Not more than 0.012%
Signal-to-noise ratio	90 dB or more
Channel separation	86 dB or more
Recording Audio Performance
Frequency characteristic	20 Hz to 20 kHz + 0.5 -4.0 dB
Total harmonic distortion factor	Not more than 0.02%
Signal-to-noise ratio	82 dB or more
Channel separation	80 dB or more
<General>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	19W
External dimensions	Width 482x Height 88x Depth 252 mm
Weight	Approx. 5.3 kg