DENON DCD-6.5L

Commentary

CD player equipped with super linear converter.

The D/A conversion method is equipped with Λ (Lambda) S. L. C.
Lambda stands for Ladder-form Multiple Bias D/A, a new method. Using a newly developed LSI, digital data is divided into two systems, each of which is shifted by applying digital bias in the + and - directions near the 0 cross point, thereby eliminating 0 cross distortion in principle.
When the digital data to be played back is smaller than this shift amount, such as when the volume is low, no 0 cross distortion occurs because there is no value crossing the original 0 cross point. Then, the two shifted data are D/A converted and added together to remove the direct current component, and an analog output with no 0 cross distortion is obtained. These two data have no MSB inversion and no 0 cross distortion in the synthesized waveform. The average of the two signals reduces any bit, the distortion is reduced to 1/2 by averaging the two signals.
If the reproduced digital data is at a level larger than the shift amount, distortion may occur because it crosses the original 0 cross point, but this can be eliminated by the S. L. C. MSB correction.
At momentary peak levels (more than about 99.6% of the maximum level), which are absent or present only a few times in a song, the lambda stops the shift operation, thereby maximizing the converter's dynamic range and ensuring a wide dynamic range.

The D/A converter eliminates the time difference between the left and right stereo signals by using the left and right independent D/A converter method.

The digital filter is equipped with an 8 x oversampling digital filter.
In addition, noise shaping reduces the audible requantization distortion by feeding back only the round-off error component of the 20-bit 8 fs digital filter output and subtracting it from the incoming data, which is equivalent to increasing the number of bits in the converter.

Equipped with an optical digital output terminal.

It is equipped with performance functions such as random play, 20-track program and repeat between A and B.
In combination with DMD-7.5L or DRR-7.5L, you can perform synchronized recording functions.

In combination with the PR ESTA 7.5L/6.5L series, system functions such as synchronized recording, timer playback, auto function and auto power on can be performed.

Wireless remote control is included.

Model Rating

Type	CD Player
D/A conversion part system	Lambda Super Linear Converter
Filter	8 x oversampling digital filter
Frequency characteristic	2 Hz to 20 kHz
Signal-to-noise ratio	106dB
Dynamic range	96dB
Total harmonic distortion factor	Not more than 0.003%
Channel separation	100dB
Analog output voltage	2.0V/10k Ω
Pwer	100 VAC, 50Hz/60Hz
Power consumption	10W Approximately 4W (during standby)
External dimensions	Width 250x Height 112x Depth 350 mm
Weight	3.5kg
Attachment	Wireless Remote Control