Audio Database

The

DENON PMA-910V
33,000yen(around the 1986 time)

Description
 
the Integrated Amplifier which aimed at the high quality & casuals which can be enjoyed until visual from an audio.

The power stage which had adopted IC excellent in S/N and the distorted characteristic as the drive stage, and uses Pc60W [ large ] of a capacity and a fT20MHz power transistor for the last stage is constituted.

In order to reproduce the character of all sound sauce obediently, while achieving simple-ization of circuit composition, the mother board chassis layout which pursued the arrangement of a part and idealization of wiring is adopted.

The strange continuous loudness control which served as the tone control function is adopted as sound quality regulation.
It is the feature that there is no degradation of a distortion seen in a general tone circuit, and operation is stable.


Rating of a mode
Form Integrated Amplifier
<Power amplifier part>
Output power (20Hz - 20kHz) 35W+35W (8ohms)
Practical use maximum except take-off 40W+40W (8 ohms, EIAJ)
45W+45W (6 ohms, EIAJ)
Input sensitivity/impedance CD input: 150mV/30kohm
THD 0.003% (1kHz, 17.5W, 8ohm)
Cross modulation distortion 0.03% (an equivalent for 35W, 8ohms)
Dynamic power 70W/4 ohm
Output bandwidth 10Hz - 40kHz (17.5W, 0.1%, 8ohms)
Frequency response 5Hz - 150kHz, and +0 -3dB (1W, 8ohm)
Output load impedance 0.18ohm
Output terminal Speaker: AorB:6-16ohm, A+B:12-16ohm
Headset-jack maximum except take-off: 100mW (8ohms), 8-400-ohm conformity
<Preamplifier part>
Input sensitivity/impedance Phono MM: 2.5mV/47kohm
CD, Video1, 2-/Tuner, Tape1, 2:150mV/30kohm
The maximum except take-off/Output power 10V/150mV(Rec Out)
RIAA deflection 20Hz-20kHz±0.5dB
<Synthesis>
Signal to noise ratio (input short circuit)
Auditory sensation weighting A
Phono MM: 72dB (at the time of a 2.5mV input)
Line: 100dB (at the time of a 150mV input)
Loudness characteristic
(Continuation variable)
Low-pass: 100Hz, +6dB maximum
High region: 10kHz, +6dB maximum
Power consumption 75W (Electrical Appliance and Material Control Law)
Power source AC100V, 50Hz/60Hz
Dimensions Width 434x height 97.5x depth of 270mm
(includeds, such as a foot, a knob, and a terminal)
Weight 5.2kg