DENON PMA-6.5L
¥ 40,000 (around 1998)
Commentary
This is a pre-main amplifier of the point component series that was developed with the aim of high-purity music reproduction in spite of its compact size.
The left and right independent structure is adopted, and interference between the left and right channels is suppressed by the left and right independent amplifier circuit and heat sink layout.
Equipped with a large power transformer, it improves the speaker drive performance.
It comes with a remote control that can turn the power on/off, adjust the volume, and switch the source.
The ease of use is improved by keeping the infrequently used keys in the sliding door.
Model Rating
Type | Pre-main amplifier |
Power Amplifier Unit | |
Rated output | 40W + 40W (6 ohm, 1 khz) |
Maximum Practical Power (EIAJ) | 55W + 55W (6 Ω) |
Speaker load impedance | 6 Ω ~ 16 Ω |
Preamplifier Section | |
Input Sensitivity / Impedance | Phono MM : 2.5mV/47k Ω Line : 150mV/47k Ω |
Rated output | Rec out:150mV |
RIAA deviation | 20 Hz to 20 kHz ± 0.5 dB |
<General> | |
Signal-to-noise ratio | Phono MM : 80 dB (at 5 mV input) Line:95dB(Source direct on) |
Power supply voltage | 100 VAC, 50Hz/60Hz |
Power consumption | 80W |
External Dimensions (including legs, knobs, terminals) | Width 250x Height 112x Depth 376 mm |
Weight | 6.0kg |
Attachment | Remote control |