Audio Database


40,000yen(around the 1998 time)

It is an Integrated Amplifier of point component stereo series.

Right-and-left independent structure is adopted and interference between channels on either side is suppressed according to the amplifier circuit of right-and-left independence, and a heat sink layout.

The large-sized power transformer is carried and speaker drive capability is raised.

on/off of a power source, volume regulation, and the remote control that can change sauce are attached.
The ease of using is raised by storing a key with little frequency in use into a slide door.

Rating of a mode
Form Integrated Amplifier
<Power amplifier part>
Output power 40W+40W (6 ohms, 1kHz)
Practical use maximum except take-off (EIAJ) 55W+55W (6ohms)
Speaker load impedance 6ohm-16ohm
<Preamplifier part>
Input sensitivity/impedance Phono MM: 2.5mV/47kohm
Line: 150mV/47kohm
Output power Rec out:150mV
RIAA deflection 20Hz-20kHz±0.5dB
Signal to noise ratio Phono MM: 80dB (at the time of a 5mV input)
Line:95dB(Source direct on)
Power supply voltage AC100V, 50Hz/60Hz
Power consumption 80W
Dimensions (a base, a knob, a terminal included) Width 250x height 112x depth of 376mm
Weight 6.0kg
Attachment Remote control