Audio Database


36,400yen(1989 release)

The Integrated Amplifier which carries image input and output and remote control.

It switches with an image input-and-output terminal besides a voice input/output, three functions are carried, and connection of a videocassette recorder etc. is possible.

While attaining simple-ization of a circuit, the mother board chassis layout which pursued the arrangement of a part and idealization of wiring is adopted.

The remote control in which on/off of power, an input change, volume, and muting operation are possible is attached.

Rating of a mode
Form Integrated Amplifier
<Power amplifier part>
Output power (20Hz - 20kHz) 37W+37W (8ohms)
Practical use maximum except take-off (EIAJ) 50W+50W (6ohms)
Input sensitivity/impedance CD input: 150mV/35kohm
THD 0.003% (1kHz, 18.5W, 8ohm)
Rated distortion 0.5% (1kHz, 37W, 8ohm)
A dynamic characteristic / dynamic power 70W (4ohms)
Output bandwidth 10Hz - 40kHz (Output 18.5W, 0.1%, 8ohms)
Line-in frequency response 5Hz-150kHz+2 -3 dB (outputs 1W and 8ohm)
Output load impedance 0.2ohm or less
Output terminal Speaker: AorB:6-16ohm
Headset-jack maximum except take-off: 9mW (8ohms),
                           3.2ohms - 2kohm conformity
<Preamplifier part>
Input sensitivity/impedance Phono MM: 2.5mV/47kohm
CD, Tuner, AUX/Video1, 2, Tape/Video3:150mV/35kohm
The maximum except take-off/Output power 10V/150mV(Rec out)
RIAA deflection 20Hz-20kHz±0.5dB
Signal to noise ratio
(the auditory sensation weighting A, input short circuit)
Phono MM:72dB
Tone control characteristic Bass:±10dB (100Hz)
Treble: ±10dB (10kHz)
Muting (only remote control) - infinity
<Image part>
Input Three lines (Video1, 2, 3)
Output Two lines (Video3, Monitor)
Power supply voltage AC100V, 50Hz/60Hz
Power consumption 80W
Dimensions (it is an included about a base, a knob, and a terminal) Width 434x height 100x depth of 273mm
Weight 5.3kg
Attachment: Wireless remote control RC-115
Battery UM-4(AAA) x2
Dimensions Width 58x height 125x depth of 19.5mm
Weight 70g (battery included)