Audio Database
775LCT
Commentary

A record player with Tone Arm 774 lc and cartridge Solitaire.

A belt drive system is adopted for the turntable part.
A motor made in Switzerland is used as the drive motor.

The tone arm is equipped with the Mission Tone Arm 774 lc.
The 774 lc is a descendant of the first generation Tone Arm 774, and is manufactured according to the principles of the first generation Mission Arm.

The cartridge is equipped with a Solitaire MM-type cartridge.

MDF is used for the cabinet part, and the adverse effect due to vibration is eliminated by using a shock absorption mechanism using a sol button (equivalent to sol ossein?).

Model Rating
Type Record player
<Turntable portion>
Drive system Belt drive system
Turntable weight 2.2kg
Number of revolutions 33, 45 rpm
Wow and flutter 0.1%(DIN peak)
Velocity deviation 0.1%
Rumble -78dB(DIN-B)
Startup Time 1.5sec
Tone Arm Section
Type Direct coupled, low mass
Bearing Alloy
Offset angle 23 ゜ 45'
Effective length 225mm
Length from pivot to spindle 210mm
Overhang 18mm
Effective mass 12g
Cartridge Allowable Weight 3 ~ 10g
Recommended Cartridge Compliance 10 ~ 50 cu
Anti-skating adjustment range 0 ~ 3g
Coefficient of friction Vertical surface : 25 mg
Horizontal surface : 25 mg
Mounting Rod Diameter 25mm
Mounting Hole Diameter 35mm
Total Length 288mm
Weight 0.4 kg (Tone Arm,, When Packaged)
Cartridge Section
Type MM Type
Mass 5.7g
Stylus Elliptic needle
Aluminum cantilever
Compliance 15cu
Output level 3 mv (1 kHz, 5cm/sec)
Channel separation 30dB(1kHz)
Channel balance 0.3dB(1kHz)
Frequency characteristic 30 Hz to 20 kHz ± 2 dB
Stereo separation 22dB(100Hz)
30dB(3Hz)
25dB(10kHz)
Needle pressure 1.8g
Recommended load 47k Ω / 100 pF
Recommended arm mass 5 ~ 16g
<Others>
External dimensions Width 430x Height 125x Depth 330 mm
Weight 5.5 kg (Turntable Unit, Packing)