
Cyrus/Mission Cyrus III
¥ 110,000 (around 1995)
Commentary
An integrated amplifier based on CYRUS I and CYRUS II with further improvements.
A 180 VA toroidal transformer is used for the power supply.
By adopting a unique configuration for the core of this transformer, mechanical noise is suppressed to 0.
By using a patented slit foil condenser with small eddy currents and a star earth system that concentrates the earth point at one point, we have obtained accurate localization and stable sound images.
It is designed to adjust volume and balance through an 8-bit microprocessor.
Magnesium / aluminum die-cast chassis is adopted for the chassis, which is resistant to disturbance vibration and magnetostriction and has improved heat radiation efficiency.
DC power supply unit PSX-R is available.
Model Rating
Type | Pre-main amplifier | ||
Effective power |
|
||
Distortion factor | 0.02% (1 kHz, 8 Ω) 0.03% (1 kHz, 4 Ω) |
||
Available supply current | 30A(p-p) | ||
Frequency characteristic | 2 Hz to 80 kHz -3dB | ||
Signal-to-noise ratio | MM : 80 dBA (5 mV Standard) Line : 98 dBA (0.5 v standard) |
||
Input sensitivity | MM : 2.75 mv (max. 50 mv) Line:200mV |
||
Output voltage | Tape out:200mV Pre out:380mV |
||
Damping factor | 100 | ||
Input terminal | CD, Video, Tuner, Aux, Tape | ||
Output terminal | Speaker (4 mm diameter banana jack) Pre-amplifier (bi-amp-supported) Tape |
||
Pwer | 180 VA toroidal transformer, 6 separate stabilized power supply | ||
Power consumption | 119W (Electrical Appliance and Material Control Law) | ||
External dimensions | Width 215x Height 73x Depth 360 mm | ||
Weight | 4.6kg |