Audio Database
CTD-1300
Commentary

Cassette deck with built-in full auto-stop mechanism.

The recording and reproducing head uses a hard permalloy solid head with excellent wear resistance.
This head is five times more wear-resistant than conventional Permalloy heads, and the smooth mirror finish improves contact with the tape.

Equipped with an equalizer selector switch for chrome tape.

Built-in recording level control with memory marker.

Equipped with a full auto-stop mechanism, the mechanism automatically stops and the operation button returns when the tape reaches the end of all recording, playback, fast forward and rewind operations.

Equipped with a limiter switch. If the switch is turned ON during recording, the limiter circuit automatically prevents distortion if a large input is suddenly input.

It is equipped with a recording display lamp, VU meter and tape counter.

Equipped with a DIN jack and a headphone jack.

Model Rating
Type Cassette deck
Recording and erasing system AC bias / AC erase
Fast forward and rewind 120 seconds or less (C-60 tape)
Frequency characteristic 40 Hz ~ 13 kHz (Chrome Tape)
40 Hz ~ 10 kHz (Low Noise Tape)
Signal-to-noise ratio 45 dB (1 kHz, 0 VU rerecording, no filter)
Distortion factor 2% (1 kHz, 0 VU re-recording)
Wow flutter 0.2%
Motor DC Motor (Electronic Governor Type)
Output Line : 460 mV (at 0 VU) / load impedance 20k Ω or more
Headphone : 23mV/8 ohm or more (at 0 VU)
Input Mic : 0.3 mv (Low Impedance Microphone Used)
Line : 70mV/220k Ω
DIN(Rec/PB) 460mV/0.3mV
Semiconductor used Transistor : 19
Pwer 100 VAC, 50Hz/60Hz
Power consumption 10W
External dimensions Width 389x Height 132x Depth 263 mm
Weight 4.7kg