Audio Database
Omicron
Commentary

Dual monaural power amplifier developed as a perfect analogue of OMEGA POWER.

As a dual monaural design, the left and right channels are independent from the power cable, eliminating interference between the channels.
It can also be used as a high-power monaural power amplifier with bridge connection.

The amplifier circuit employs a first stage / pre-driver stage with a discrete configuration consisting of J-FET and MOS-FET, and an output stage with 14 single-channel high-voltage / high-current bipolar power transistors.

The power supply section is equipped with two 1,800 VA giant transformers, and the capacitor has a large capacity of more than 80,000 μ F for one channel.

The signal transmission cable uses a shielded litz wire with less skin effect.
OFC wire is used for the internal wiring cable.

A gold-plated bus bar is used to supply power to the output stage.

Model Rating
Type Stereo power amplifier
Rated output 350W + 350W (8 Ω)
700W + 700W (4 Ω)
1,300W (8 Ω, bridge connection)
2,800W (4 Ω, bridge connection)
Frequency characteristic 20 Hz to 20 kHz ± 0.1 dB
Input Sensitivity / Impedance 1.3 V (Rated Output) / 75k Ω
Output impedance 0.017 Ω
Signal-to-noise ratio 135dB
Harmonic distortion factor + noise 0.002%
Power consumption 280W (idle)
External dimensions Width 521x Height 310x Depth 570 mm
Weight 105kg