CLASSE OMEGA Power
¥ 3,500,000 (around 1999)
Commentary
OMEGA series stereo power amplifier.
As a dual monaural design, the left and right channels are independent from the power cable, eliminating interference between the channels.
It can also be used as a high-power monaural power amplifier with bridge connection.
The amplifier circuit employs a first stage / pre-driver stage with a disclitoto configuration of J-FET and MOS-FET, and an output stage with 16 single-channel high-voltage / high-current bipolar power transistors.
The voltage supply to the input stage employs a discrete configuration and high-precision regulator module with a shield case, and a high-quality metalized polypropylene capacitor is used for the interstage device.
The power supply section is equipped with two 2,500 VA giant transformers and uses a large-capacity capacitor with a total capacity of over 100,000 μ F per channel.
The signal transmission cable uses a shielded litz wire with less skin effect.
Model Rating
Type | Stereo power amplifier |
Rated output | 450W + 450W (8 Ω) 900W + 900W (4 Ω) 1,800W (8 Ω, bridge connection) 3,600W (4 Ω, bridge connection) |
Frequency characteristic | 20 Hz to 20 kHz ± 0.1 dB |
Input Sensitivity / Impedance | 1.3 V (Rated Output) / 75k Ω |
Output impedance | 0.017 Ω |
Signal-to-noise ratio | 135dB |
Harmonic distortion factor + noise | 0.004% |
Power consumption | 360W (idle) |
External dimensions | Width 521x Height 322x Depth 731 mm |
Weight | 114kg |