|275,000 yen(around the one-set and 1997 time)
The speaker system which hits the prestige model of the CELESTION developed
aiming at the ultimate compact speaker.
The 16cm corn type Woofer is
carried in low-pass.
The intensity of the central part is raised by really molding a diaphragm
and a center cap, and distorted reduction is aimed at.
The 3cm dome shape tweeter is carried in the high region.
having adopted a light weight and aluminum with little resonance as a diaphragm
and also attaining a weight saving, in order to tell vibration of a voice coil
without a loss to a diaphragm, integral moulding of a diaphragm and the voice
coil bobbin is carried out, and the response engine performance is raised.
A low loss polypropylene film capacitor and a silver plating
oxygen-free-copper coil reactor are adopted as a network part, and the
improvement of the phase characteristic is aimed at.
connecting terminal makes the Woofer and tweeter side become independent, and
bi-wiring connection and a by amplifier drive are possible for it.
tweeter is fixed to the aluminum front panel of mental make-up, and the Woofer
is fixing mount of a unit to the baffle of the alpha crystal enclosure. Thereby,
vibration of a mutual unit is pressing down the dirt of sound which gives other
units and is generated.
The new-materials alpha crystal is adopted as
This material is what mixed the polymer which is a
high-density inactivity substance to mineral matter, has density also about 2.5
times compared with MDF, and there is also very little resonance at the Takauchi
part loss, and also it equips form with free nature.
By using an alpha
crystal by an original forming process, firm dress structure is realized and
generating of the standing-wave in a core is suppressed. Moreover, the exterior
serves as form which drew the gently-sloping curve and was narrowed down back in
order to avoid the bad influence by acoustic diffraction.
stand for exclusive use is attached.
The same alpha crystal as the enclosure
is adopted as a stand. Furthermore, it is considered as the structure which
touches by three points to the main part of a speaker, and a top of flooring,
respectively, and in order to obtain a still more sharp feeling of the normal
position, the spike for exclusive use is attached.
Moreover, it is designed let a speaker cable pass inside a support.
||2 ways, 2 speakers, a sealing system, and a
book shelf type
||For low-pass: 16cm corn type
regions: 3cm dome shape
|Output sound pressure level
|The maximum input
||Width 212.5x height 992.5x depth of 350mm (stand includeds)
||17kg (main part)
||An exclusive stand