Audio Database

The

CEC HS910
49,300 yen(release time -- unknown)

Description
 
The full auto player which adopted the Quartz PLL servo direct-current motor.

In addition to a full auto mechanism, the photograph sensor system which detects a return position is adopted. Since this system is no perfect contacting type adapting high sensitivity IC by Cds, it does not have a bad influence on arm sensitivity.
Moreover, the arm lifter of an oil dumping type is carried.

The front operation of a feather touch system that DD-8200 was adopted is adopted.

The straight type is adopted as a tone arm.
reduction of the execution mass have obtained the axle distribution which was excellent with lateral balance with an equal straight pipe arm, and according to adoption of the lightweight head shell made from a carbon fiber -- conjointly -- a high -- the compliance cartridge is also supported.

In order to reduce the bad influence by vibration by the sound pressure from a speaker, or external vibration, the suspension system which made the tone arm part become independent is adopted.


Rating of a mode
Form Record player
Drive system Direct-drive system
Motor 20 pole 30 slot, a Quartz PLL servo direct-current motor
Turntable The product made from 32cm aluminum die casting
Number of rotations 33 1 / 3 or 45rpm
Wow and flutter Below 0.025%WRMS
Signal to noise ratio (DIN-B) 70dB or more
Tone arm Static balance straight line type pipe arm
Needle pressure adjustable range 0-2.5g
Cartridge MC-20ES (ellipse needle)
An attached mechanism Anti skating force control mechanism
Dimensions Width 450x height 150x depth of 384mm
Weight 10.1kg