Audio Database
CT90
Commentary

CT series tall boy type speaker system.

A 26 cm cone type woofer is installed in the low range.
The frame of this unit is made of aluminum die-cast to improve the sound quality during large-amplitude reproduction. In addition, a corrugated damper with optimum compliance is used for the damper to greatly improve the linearity of cone amplitude.
Aluminum with excellent heat radiation effect is used for the voice coil bobbin, and heat radiation holes are provided in the bobbin so that it can withstand temperature rise up to 250 ℃.
The cone paper uses a material with an excellent damping effect to eliminate split vibrations that cause colorization of the playback sound. The edge uses a thoroughly examined material and structure to reduce unwanted resonance and improve cone stability.

Equipped with 12 cm cone type skoker in the middle area.
This unit is equipped with a rear enclosure to eliminate interference with the woofer, and the dump material inside the enclosure and special coated cone paper improve linearity and transient characteristics.

A 2.5 cm titanium dome type tweeter is installed in the high range.
The lightweight, high-rigidity 25 μ - thick titanium diaphragm has been adopted for the diaphragm. In addition, input resistance and machining accuracy have been greatly improved by the adoption of the bobbin integrated type. In addition, a special dump structure has been adopted for the diaphragm, yoke, diaphragm and diffuser to eliminate harmful resonance of titanium.

Parts with less error are used in the network section to achieve a more accurate crossover frequency. In addition, parts such as air core or ferrite core coil are laid out with space on the board to eliminate inter-part effects.

6 mm thick for the speaker terminal2Large terminals are used for speaker cables.

The enclosure is made of 42 mm thick high-density particleboards which are butt-plated on both sides to eliminate board deformation and the round corners are made of top-of-the-line wood.
Felt is attached to the front baffle to improve sound quality by absorbing the sound reflected by the tweeter.

There are 2 types of exterior, mahogany and piano lacquer finish.

Model Rating
Method 3-Way, 3-Speaker, Bass Reflex System, Tall Boy Type
Units Used For low band : 26 cm cone type
For Medium Range : 12 cm cone type
For high-pass : 2.5 cm dome type
Allowable input 150W continuous
250W maximum
Nominal impedance 4 Ω
Output sound pressure level 93.4dB
Frequency characteristic 20 Hz to 30 kHz
Crossover frequency 450 Hz, 4 kHz
External dimensions Width 310x Height 900x Depth 327 mm
Weight 24kg