B&W Nautilus HTM1
¥ 350,000 (1 unit, around 2000)
Commentary
This is a center speaker made with the advanced standards of the N800 series.
Two 16.5 cm cone type woofers are installed in the low range.
Paper / Kevlar cone is used for this unit.
It has a 15 cm cone type mid-range in the mid-range.
The diaphragm is an FST unit with a Kevlar cone. The FST maximizes the effect of Kevlar by improving the response time of the cone and sound transmission integrity, and the frame is designed to minimize the impedance to airflow from the rear of the driver.
A 2.5 cm metal dome type tweeter is installed in the high range.
The enclosure has a curved cabinet structure and uses a closed system.
In addition, a matrix structure is adopted inside.
There are 3 variations of the finish of the exterior, black ash, red cherry and cherry.
As a separately sold option, there is a special stand that can change the elevation angle in 3 stages.
This stand comes in 2 color variations, black and silver.
Model Rating
| Method | 3-Way, 4-Speaker, Sealed System, Center Type, Anti-magnetic Design |
| Unit | For low band : 16.5 cm cone x2 For Medium Range : 15 cm cone type For high-pass : 2.5 cm dome type |
| Frequency characteristic | 35 Hz to 30 kHz -6dB 42 hz to 22 khz -3dB |
| Frequency response | 49 Hz to 20 kHz ± 3 dB |
| Output sound pressure level | 90dB/2.83V/m |
| Nominal impedance | 8 Ω |
| Crossover frequency | 350 Hz, 4 kHz |
| Recommended power amplifier output | 50W ~ 250W (at 8 Ω) |
| External dimensions | Width 783x Height 318x Depth 316 mm |
| Weight | 21kg |
| Sold separately : Speaker Stand NHTM-ST (1 unit, ¥ 70,000) | |
| External dimensions | Width 521x Height 295x Depth 312 mm |
| Weight | 13.3kg |
.jpg)