BRYSTON BP-20
¥ 240,000 (around 2000)
Commentary
Professional type preamp with thin yet low impedance balanced output.
A fully discrete design is used for the circuit configuration.
In addition to the RCA unbalanced outputs, there are also XLR3 balanced outputs.
The independent design of the power supply unit reduces interference from the power supply unit.
There are 2 color variations of black and silver.
There was a separate phono equalizer amplifier module for MM/MC as an option sold separately.
Model Rating
| Type | Control amplifier |
| Input sensitivity | RCA : 500mV/10k Ω XLR3 : 1.0V/10k Ω |
| Maximum power output | RCA : 15V/600 Ω XLR3 : 30V/600 Ω |
| Distortion factor | Not more than 0.0025% (3 v) |
| Signal-to-noise ratio | RCA:100dB(0.5V) XLR3:103dB(0.5V) |
| Frequency characteristic | 20 Hz to 20 kHz ± 0.5 dB |
| Rear panel terminal | Input terminal : 7 systems (XLR : 2 systems) Tape monitor : 1 system Pre-output : Route 3 (RCA : 2 systems, XLR3 : 1 system) |
| Power supply voltage | 100 VAC, 50Hz/60Hz |
| Power consumption | Maximum : 28W |
| External dimensions | Width 432x Height 50x Depth 281 mm |
| Weight | Body : 3.6 kg Power Supply : 0.85 kg |
.jpg)