EMT 948
* Released in 1985
¥ 1,290,000 (around 1987)
¥ 1,842,000 (around 1993)
Commentary
A manual player system with an equalizer.
Quartz lock type direct drive system is adopted for the turntable part.
You can switch between Mono and Stereo.
Remote control is possible.
Model Rating
Type | Record player |
Phono Motor Section | |
Drive system | Quartz lock direct drive |
Number of revolutions | 33 1/3, 45, 78 rpm |
Rotational speed deviation | + / - 0.1% |
Turntable | 33 cm Aluminum Die Cast |
Wow flutter | ± 0.075% |
Tone Arm Section | |
Type | Dynamic balance type |
Effective length | 230mm |
Overhang | 15mm |
Needle pressure range | 0 ~ 5g |
Attachment | Arm lifter Inside for scan seller |
Equalizer Amplifier Section | |
Equalization characteristic | DIN, NAB, IEC 75/318/3180 μ s, FLAT 0/318/3180 μ s |
Input Sensitivity / Impedance | MM : 2 ~ 10mV/47k Ω MC : 0.3 ~ 1.4 mV (17 dB transformer) |
Input margin | 20dB |
Output level | 700 mv, 10 v (0 to + 15 db) / 200 Ω |
Harmonic distortion factor | 0.1% or Less (30 Hz to 12 kHz, + 15dB/200 Ω) |
Signal-to-noise ratio | 70 dB (peak, wtd) |
Crosstalk | 55 dB or More (30 Hz to 16 kHz) |
Filter | Scratch Filter : 2 kHz ~ 20 kHz Variable, 10dB/oct. |
Monitor output | Mono : unbalanced Headphone, stereo : unbalanced Headphone : 200 ~ 600mV/200 ohm Stereo : 500 ~ 1500mV/2k Ω |
<General> | |
Pwer | 100 V ~ 120V/200V ~ 240 V, 50Hz/60Hz |
Power consumption | 40W 85W (max) |
External dimensions | Width 460x Height 235x Depth 475 mm Up to Panel Surface : Height 157 mm |
Weight | 26.0kg |