EMT 938
* Released in 1985
¥ 900,000 (around 1987)
¥ 1,248,000 (around 1993)
Commentary
A manual player system with an equalizer.
Quartz lock type direct drive system is adopted for the turntable part.
You can switch between Mono and Stereo.
Remote control is possible.
Model Rating
Type | Record player |
Phono Motor Section | |
Drive system | Quartz lock direct drive |
Number of revolutions | 33 1/3, 45, 78 rpm |
Turntable | 33 cm Aluminum Die Cast |
Wow flutter | ± 0.075% |
Tone Arm Section | |
Type | Dynamic balance type |
Effective length | 230mm |
Overhang | 15mm |
Needle pressure range | 0 ~ 5g |
Attachment | Arm lifter Inside for scan seller |
Equalizer Amplifier Section | |
Equalization characteristic | DIN, NAB, IEC 75/318/3180 µs |
Input Sensitivity / Impedance | MM : 2 ~ 10mV/47k Ω MC : 0.3 ~ 1.4 mV (17 dB transformer) |
Input margin | 20dB |
Output level | 1.55 V (+ 6 dB) / Maximum 10V/200 Ω |
Harmonic distortion factor | 0.2% or Less (30 Hz to 12 kHz, + 15dB/200 Ω) |
Signal-to-noise ratio | 70 dB (peak, wtd) |
Crosstalk | 50 dB or More (30 Hz ~ 16 kHz, 4.4 V Output) |
Filter | Scratch Filter : 2 kHz ~ 20 kHz Variable, 10dB/oct. |
Monitor output | Mono : unbalanced Headphone, stereo : unbalanced Headphone : 200 ohm |
<General> | |
Pwer | 100 V ~ 120V/200V ~ 240 V, 50Hz/60Hz |
Power consumption | 40W 85W (max) |
External dimensions | Width 500x Height 195x Depth 440 mm Up to Panel Surface : Height 115 mm |
Weight | 25.0kg |