Aurex SB-210
¥ 28,000 (around 1976)
Commentary
Pre-main amplifier with side terminal.
All connection terminals are provided on the side panel for easy connection even when installed on a shelf or rack.
The input / output terminal is on the right side of the connector and the speaker terminal is on the left side.
All stages are directly connected OCL circuit.
Equipped with a panel handle.
Model Rating
Type | Pre-main amplifier | ||
Circuit system | All stages connected quasi complimentary service OCL circuit | ||
Power Amplifier Unit | |||
Output |
|
||
Harmonic distortion factor | 0.8% (at continuous output) 0.05% (at 1W output) |
||
Frequency characteristic | 20 Hz to 100 kHz -3dB | ||
Output Bandwidth (IHF) | 10 Hz to 25 kHz | ||
Damping factor | 20 | ||
Residual noise | 0.8mV | ||
Preamplifier Section | |||
Input Sensitivity / Impedance | Phono : 3mV/47k Ω Aux/Tape, Tuner : 200mV/50k Ω |
||
Recorded output | Tape rec:150mV | ||
Equalizer allowable input | 140mV(RMS) | ||
RIAA deviation | ± 0.8 dB | ||
Signal-to-noise ratio (IHF, A-network) | Phono:70dB Aux/Tuner:85dB |
||
Tone control | Bass : ± 10 dB (100 Hz) Treble : ± 10 dB (10 kHz) |
||
<General> | |||
Power outlet | Linkage : 1 system Non-linked : 1 system |
||
Power supply voltage | 100 VAC, 50Hz/60Hz | ||
Power consumption | 45W | ||
External dimensions | Width 400x Height 126x Depth 312 mm | ||
Weight | 7.1kg |