audiolab 8000C
¥ 150,000 (released in 1986)
Commentary
Stereo control amplifier with straight line design.
It is upgraded by using high-quality components.
The line amplifier uses Class A to obtain a clearer stereo image.
.JPG)
.JPG)
Model Rating
| Type | Control amplifier |
| Maximum output voltage | 7.76Vrms/100 Ω |
| Total harmonic distortion factor | 0.01% or less |
| Frequency characteristic | RIAA : 20 Hz to 20 kHz ± 0.5 dB Line : 20 Hz to 20 kHz ± 0.5 dB |
| Input Sensitivity / Impedance | Phono MM : 2.0mV/47k Ω Phono MC : 110 μ V/100 Ω Tuner : 100mV/20k Ω CD : 200mV/10k Ω Tape1, 2 : 100mV/20k Ω |
| Recording Output / Impedance | Tape1, 2 : 100mV/1k Ω |
| Headphone out | 7.76V/100 Ω |
| Signal-to-noise ratio | Phono MM:79dB Phono MC:75dB Line:90dB |
| Tone control | Bass : ± 6 dB (20 Hz) Treble : ± 6 dB (20 kHz) |
| Protection circuit | Built-in electronic system |
| Pwer | 100 V, 50Hz/60Hz |
| Power consumption | 50 VA max. |
| External dimensions | Width 445x Height 74x Depth 335 mm |
| Weight | 6kg |