Audio Analogue PUCCINI RE
¥ 168,000 (around 2003)
Commentary
As the successor model of Puccini, this integrated amplifier is compatible with remote control.
The circuit board has been renewed to minimize the signal path.
In addition, a signal switching relay is placed near the input terminals for brush-up.
A phono equalizer circuit corresponding to MM and MC is mounted.
The power supply is equipped with a toroidal transformer.
Equipped with a pre-out terminal, it can be developed into a bi-amplifier system.
Wireless remote control is included.
The remote control allows input selection, volume adjustment, and mute operation.
.jpg)
.jpg)
Model Rating
| Type | Pre-main amplifier |
| Rated output | 40W + 40W (8 ohm, 1 khz) 65W + 65W (4 ohm, 1 khz) |
| Total harmonic distortion factor | 0.1% or Less (40W, 8 Ω, 1 kHz) |
| Frequency characteristic | 20 Hz to 20 kHz ± 0.1 dB |
| Input sensitivity | Line:1Vrms Phono MM:10mVrms Phono MC:1mVrms |
| Input impedance | Line : 50k Ω Phono MM : 47k Ω Phono MC : 100 Ω |
| Signal-to-noise ratio | Line : 80 dB or more Phono MM : 70 dB or more Phono MC : 60 dB or more |
| Channel separation | 80 dB or more |
| Input system | Phono MM/MC : One system Line : Line 5 |
| Output terminal | Tape : Impedance 600 Ω Speakers : Impedance 4 Ω ~ 16 Ω Pre out |
| Maximum Power Consumption | 150VA |
| External dimensions | Width 445x Height 85x Depth 365 mm |
| Weight | 7.0kg |
| Attachment | Wireless Remote Control |