Audio Analogue Maestro INT
¥ 600,000 (released in July 2001)
Commentary
This is a reference integrated amplifier developed by integrating the technologies of the audio analog composer series.
It is equipped with a phono equalizer that supports both MM and MC.
Dual monaural configuration with left / right channels, preamplifier and power amplifier independent power supply is adopted.
One balance terminal is mounted on the line input of the preamplifier section.
It can be developed into a bi-amplifier system by utilizing the pre-out terminal.
It comes with a remote control for volume adjustment, muting operation and function switching.
Model Rating
Type | Pre-main amplifier |
Maximum Continuous Output (20 Hz to 100 kHz) | 150 Wrms + 150 Wrms (8 Ω) 300 Wrms + 300 Wrms (4 ω) 600W + 600W (1 ohm) |
Maximum Continuous Output (1 kHz, Load Resistance) | 169W + 169W (8 Ω) 330W + 330W (4 Ω) 625W + 625W (2 Ω) |
Total harmonic distortion factor | 0.01% or Less (1 Vrms, 47 Ω, 1 kHz) |
Frequency characteristic | 1 Hz to 250 kHz 3 db |
Phono input sensitivity | MM:10mVrms MC:1mVrms |
Input impedance | Line : 21k Ω Phono MM : 47k Ω / 220 pf Phono MC : 100 Ω |
Preamplifier gain | 12dB |
Power stage gain | 33dB |
Signal-to-noise ratio | Line : 90 dB or more (no-weighted) 98 dB or more (A-weighted) Phono MM : 70 dB or more (No-weighted) 80 dB or more (A-weighted) Phono MC : 60 dB or more (No-weighted) 70 dB or more (A-weighted) |
Channel separation | 100 dB or More (1 kHz, Short Pin Not Used) |
Input system | Phono MM/MC : One system Line : 4 routes Balanced : 1 system |
Output system | Tape : 1 system Speakers : Route 1 Pre-out : 1 system |
Maximum Power Consumption | 1,500VA |
External dimensions | Width 445x Height 195x Depth 475 mm |
Weight | 52.0kg |
Attachment | Wireless Remote Control |