Audio Analogue Bellini RE
¥ 198,000 (around 2003)
Commentary
A preamplifier that is ideal for combination with power amplifiers such as Donizetti and Corelli.
With the addition of the remote control function, the circuit board of RE has been completely renewed and the signal path has been minimized.
The signal circuit has a DC configuration without using a coupling capacitor.
It is equipped with a phono equalizer amplifier for both MM and MC.
Equipped with an independent recording selector.
Two output terminals are provided for bi-amplifier systems, etc.
A 10 mm thick silver alloy aluminum front panel is used for the front panel, and the knob is machined to finish.
Wireless remote control is included.
The remote control allows input selection, volume adjustment, and mute operation.
Model Rating
Type | Control amplifier |
Total harmonic distortion factor | 0.01% or Less (1 Vrms, 47k Ω, 1 kHz) |
Frequency characteristic | 5 Hz to 200 kHz |
Input sensitivity | Line:1Vrms Phono MM:10mVrms Phono MC:1mVrms |
Input impedance | Line : 50k Ω or more Phono MM : 47k Ω / 220 pf Phono MC : 100 Ω |
Signal-to-noise ratio | Line : 80 dB or more Phono MM : 70 dB or more Phono MC : 60 dB or more |
Channel separation | 80 dB or more |
Input system | Phono MM/MC : One system Line : 4 routes Tape : 1 system |
Output terminal | Main1/2, Tape, Total Route 3 |
External dimensions | Width 445x Height 85x Depth 365 mm |
Weight | 7.0kg |
Attachment | Wireless Remote Control |