AKAI X-300
¥ 140,000 (around 1965)
Commentary
This is a studio-type stereo tape recorder compatible with No. 10 reel.
Cross-field head is used for the head part.
The crossfield head is designed so that the signal current is applied to the recording head and the bias current is applied to the external bias head, which is located at a predetermined spatial position offset relative to each other so that the signal recorded on the tape is not adversely affected by the bias field.
An all-transistor solid-state amplifier is used for the amplifier section.
In addition, an amplifier arrangement by a card system is adopted.
The mechanism uses an outer rotor motor to drive the capstan directly.
Equipped with sound oversound recording function.
Equipped with automatic stop and automatic shut-off mechanism.
FM multiplex broadcasting can also be recorded (90 kHz bias)
Equipped with a tape cleaner.
Equipped with a 4-digit tape counter.
Equipped with 2 VU meters.
It can be horizontal or vertical.
Model Rating
Type | Tape deck |
Tape speed | 9.5cm/s, 19cm/s 38cm/s (Adapter Used) |
Wow flutter (play only) | 0.05% RMS or Less (19cm/s) 0.085% RMS or less (9.5cm/s) |
Tape velocity deviation | + / - 0.3% for each tape speed |
Frequency characteristic | 30 Hz ~ 24 kHz ± 3 dB (19cm/s) 30 Hz ~ 18 kHz ± 3 dB (9.5cm/s) |
Total harmonic distortion factor | 4.0% or less (10W, 1 kHz, 0 VU) |
Signal-to-noise ratio | 47 dB or more |
Crosstalk | Mono : -82dB or less Stereo : -45dB or less |
Input level | Mic : 0.5 mV or more, jack Line : 50 mv or more, jack |
Output | Music power : 25W + 25W Undistorted output : 20W + 20W |
Equalizer characteristics | NARTB characteristics (regeneration) |
Recording bias frequency | 90kHz |
Recording level indication | 2 x VU meter |
Recording system | 4-track stereo / monaural, cross field bias system (Japanese Patent No. 451906) |
Fast-forward and rewind method | 45 seconds each (370m tape, 50 hz) 36 seconds each (370m tape, 60 hz) |
Recording time | Mono - 12 hours (1110m tape) Stereo : 6 hours (1110m tape) |
Maximum use reel | 10 type reel |
Heads | Recording head : 4-track stereo / monaural (low impedance 135 Ω (1 kHz)) Bias Head : 4-track stereo (low impedance 750 Ω (90 khz)) Playhead : 4-Track Stereo / Monaural (low impedance 1000 Ω at 1 khz) Erase Head : 4-track stereo (low impedance 750 Ω (90 kHz)) |
Motor | For Capstan : Hysteresis Synchronous 2 Speed Motor For Fast Forward / Rewind : 2 x 4-pole induction motors |
Spekers | 2 x 16 cm cone |
Semiconductor used | Transistor : 26 Qualifier : 1 Diode : 5 pcs |
Power supply voltage | 6-step switching between 100 V ~ 240 V AC, 50Hz/60Hz (by replacing capstan shaft) |
Power consumption | 55 VA ~ 140 VA |
External dimensions | Width 410x Height 340x Depth 230 mm |
Weight | 21.3kg |