AKAI 1710W
¥ 61,000 (around 1960 s)
Commentary
A compact type tape recorder that uses a walnut finished cabinet.
It supports 3 speeds of 4.75cm/s, 9.5cm/s and 19cm/s.
In addition, 38cm/s can be handled by using an adapter.
Uses a shield head.
You can easily switch between stereo and monaural using the track selector.
A 2-lever system is used for the operation part.
Equipped with automatic shut-off mechanism.
Equipped with tone control function.
Equipped with a tape shifter.
It has a built-in speaker.
The unit contains two 12x18cm elliptical cone speakers.
Equipped with DIN jack and stereo headphone jack.
Equipped with a 3-digit counter with reset button.
Equipped with a VU meter.
It can be specified in both horizontal and vertical states.
Equipped with a built-in universal power supply voltage switching device, it can be freely changed between 100 VAC ~ 240 VAC.
The speaker system SW-50, which was sold separately, is designed for 1710W. When combined, you can enjoy more powerful playback than the built-in speakers.
Model Rating
| Type | Tape deck |
| Tape speed | 4.75cm/s, 9.5cm/s, 19cm/s 38cm/s can be handled by using a 15 inch adapter) |
| Wow and flutter | Not more than 0.16% RMS |
| Frequency characteristic | 40 Hz to 18 kHz (19cm/s) 50 Hz ~ 15 kHz ± 3 dB (19cm/s) 40 Hz ~ 14 kHz (9.5cm/s) |
| Signal-to-noise ratio | 50 dB or more |
| Total harmonic distortion factor | 2% or Less (1 kHz, 0 VU) |
| Music power | 4W+4W |
| Recording (playback) compensation characteristics | NAB characteristics |
| Recording level indication | VU meter (2) |
| Recording system | 4-track, stereo / mono recording |
| Fast-forward and rewind time | 150 seconds (370m tape, 50 hz) 120 seconds (370m tape, 60 hz) |
| Recording time | Mono : 8 hours (370m tape, 4.75cm/s) Stereo : 4 hours (370m tape, 4.75cm/s) |
| Heads | Record / Playhead : 4-Track Stereo / Mono (Impedance 3.5k Ω, 1 kHz) Erase Head : 4-track stereo (Impedance 3.5k Ω, 60 kHz) |
| Motor | 2-speed induction motor |
| Spekers | 12cmx18cm cone x2 |
| Maximum use reel | Reel 7 |
| Semiconductor used | Vacuum Tube x5 Transistor x4 |
| Pwer | Can be switched in 6 stages between 100 V ~ 240 V AC, 50Hz/60Hz |
| Power consumption | 80VA |
| External dimensions | Width 345x Height 360x Depth 190 mm |
| Weight | 15kg |
| Attachment | One #5 demonstration tape One empty reel of #5 2 microphone (with stand) Vinyl Leather Cover x1 Reel Holder x2 Silicon Oil x1 2 Tape Cleaner Pads 1 spare fuse |
.jpg)