AKAI AS-P302

Commentary

An AV surround processor that supports Dolby surround sound.

It has a built-in Dolby Surround Decoder and supports video sources recorded in Dolby Surround sound.
It also includes a matrix position and supports non-Dolby encoded sources.

Equipped with tone control, you can adjust the impact of low range surround.

A built-in amplifier for the rear speaker is used by connecting the tape terminal of your amplifier to the source terminal of the AS-P302.

Four video terminals are installed.
It also has a built-in re-hold function that allows you to dub the source of a video disc with Video1 while monitoring the software of Video2.

Equipped with a 3-mode display that displays volume, sound field balance of L and R, and memory contents.

Equipped with a mute button.

Equipped with an input balance adjustment knob that can adjust the L/R imbalance of the input source.

Monaural input is possible using the L side of the video audio terminal.

Wireless remote control is included.

Model Rating

Type	Surround processor
Maximum practical power	35W + 35W (8 ohm, EIAJ)
Total harmonic distortion factor	0.3%
Signal-to-noise ratio (IHF-A)	90dB
Proper speaker impedance	8 Ω ~ 16 Ω
Input Sensitivity / Impedance	Source in, Tape, VCR, V. Disc (audio) : 150mV/47k Ω VCR, V. Disc (video) : 1Vp-p/75 Ω
Output Level / Impedance	Source out : 150mV/3.5k Ω Tape, VCR (audio) : 150mV/1k Ω VCR (video) : 1Vp-p/75 Ω
Frequency characteristic	10 Hz to 25 kHz -3dB 50 hz to 6 khz -3dB (Dolby surround)
Tone control	+10dB(100Hz)
Pwer	100 VAC, 50Hz/60Hz)
Power consumption	50W
External dimensions	Width 440x Height 78x Depth 260 mm
Weight	Approx. 4.9 kg
Attachment	Wireless Remote Controller RC-P302N