AIWA AD-L200
¥ 54,800 (around 1978)
Commentary
Stereo cassette deck for mixing play.
Microphone and line-in level controls allow for microphone recording mixing and playback mixing to match recorded tapes.
Equipped with a 2-color 12-point FL optical display. The FL is a fluorescent display tube, which has a high response speed (5 μ s) to signals and is visually clear.
On the optical display, the VU and peak can be displayed by switching.
Ultra-hard permalloy head is used for the head.
Equipped with bias fine adjustment mechanism for LH tape.
LED is used for each display.
Equipped with a rec mute mechanism.
Equipped with a quick review queue mechanism.
Equipped with timer standby mechanism, and by connecting a timer sold separately, it is possible to record absence and play alarm clock.
Equipped with a Dolby system with built-in MPX filter.
Adopts a mechanical full auto-stop mechanism.
Equipped with an oil dump eject.
Equipped with an end mark that makes it easy to check the remaining amount of tape.
Model Rating
Type | Stereo cassette deck |
Track system | 4-track 2-channel |
Frequency characteristic | LH Tape : 25 Hz ~ 14 kHz FeCr Tape : 25 Hz to 17 kHz CrO2 Tape : 25 Hz to 16 kHz |
SN ratio (FeCr Tape) | 52dB(Dolby NR off) 65dB(Dolby NR on) |
Wow flutter | 0.06%(WRMS) |
Tape speed | 4.8cm/s |
Fast forward and rewind time | 80 seconds (C-60) |
Recording system | AC Bias (100 kHz) |
Distortion factor | 1.0% or less (0 VU, FeCr tape) |
Erasing method | AC Erase |
Input Sensitivity / Impedance | Line : 50mV/50k Ω or more Mic : 0.3mV/200 Ω ~ 10k Ω Compatible |
Output Level / Impedance | Line : 0.41V/50k Ω or more compatible Headphone : 0.7mW/8 Ω (0 VU) |
Semiconductor used | IC : 5 Transistor : 18 Diode : 5 pcs LED : 3 pcs |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 10W |
External dimensions | Width 420x Height 150x Depth 330 mm |
Weight | 6.7kg |
Attachment | Head cleaning rod 2 stereo pin cords |