Audio Database

CS-72
Commentary

3-band compatible radio cassette.

Equipped with a playback microphone mixing mechanism. With microphone volume, volume can be adjusted.

A 2-way speaker with a 12 cm cone woofer and a 4 cm cone tweeter is used for the speaker section.

In addition to FM/AM broadcasting, shortwave broadcasting (SW) is also available.

It has a music sensor function of up to 9 songs.
The number of specified songs is displayed with 9-point LED and can be checked.

Equipped with a Rec Mute mechanism that is convenient for unrecorded parts.

An ITL/OTL circuit is used for the amplifier.
In addition, the external speaker terminal is mounted so that external speakers can be connected.

Equipped with an FM muting mechanism.

Equipped with a 2-stage switching type tape selector corresponding to CrO2 tape.

It uses an oil dump mechanism and is a soft cassette eject.

It has queue / review capability.

Equipped with a full auto-stop mechanism, the button returns when the tape is finished and the mechanism stops.

It is a 3-power system and supports battery / AC power supply / car battery (with adapter).

It is equipped with a loudness switch.

With built-in tone control, the bass / treble can be adjusted independently.

Equipped with an AFC switch, stable FM reception is possible.

It has a large 2-meter with 4 functions.

Equipped with a mechanical pause mechanism.

Equipped with a tape sleep mechanism.

Model Rating
Type Cassette recorder with 3-band (FM/SW/MW) radio
Radio Club
Receiving frequency FM : 76 MHz to 90 MHz
SW : 3.9 MHz to 12 MHz
MW : 525 kHz to 1,605 kHz
Antenna FM, SW : Whip antenna
MW : ferrite bar antenna
Equipped with FM external antenna terminal
Tape Recorder and Common Part
Track system 4-track 2-channel stereo system
Recording system AC bias
Erasing method AC Erase
Tape used C-30, C-60, C-90 (C-120)
Recording time 60 minutes (C-60 round trip)
Frequency characteristic 40 Hz ~ 12.5 kHz (Normal Tape)
40 Hz ~ 15 kHz (CrO2 Tape)
Signal-to-noise ratio 53dB(Line out(JIS))
Wow flutter 0.07%(WRMS)
Mike 2 built-in condenser microphones
Maximum practical power 6.4W (3.2W + 3.2W, EIAJ/DC)
Input terminal Mic Jack : 3.5 φ Mini Type x3
Line in jack : 2 pin types
Output terminal Line out jack : 2 pin types
EXT. SP Jack : 3.5 φ Mini Type x2
Phones jack : 6.3 φ standard jack
Spekers Low Band : 12 cm cone x2
For high pass : 2 x 4.0 cm cone type
Semiconductor used IC : 12
Transistor : 41
Diode : 19 units
LED : 10 pcs
FET : 1
Pwer AC Power : 100 VAC, 50Hz/60Hz
Battery Power Supply : 12 VDC (8 AAA batteries)
Car battery (combined with car adapter)
Power consumption 14W (at AC)
External dimensions Width 490x Height 273x Depth 165 mm
Weight 6.4 kg (including battery)
Attachment AC power cord
Erase Plug x1