|
| Acustik-Lab Bolero Piccolo |
Piano black: 208,000 yen(two-set 1 set, the October, 1991 release)
Erable blue / erable Brown: 218,000 yen(two-set 1 set, the October, 1991
release)
A walnut/oak: 148,000 yen(two-set 1 set, the October, 1991 release) |
The speaker system of bolero series.
The 12.5cm corn type
Woofer is carried in low-pass.
By the double voice coil system, this unit
uses a High Q ferrite core with high permeability, and is decreasing the number
of winding wire. Moreover, to a diaphragm, it is lightweight and rigidity is
using neo flex time with a moderate high internal loss.
The 1.9cm dome
shape tweeter made from Denmark vifa is carried in the high region.
The magnetic fluid cooling system is used for this unit, and it is using
polyamide for a diaphragm.
A network part reduces part mark as much as possible, and
is using only the part selected carefully.
Finishing of the enclosure
differed in the price according to those with five kind, and finishing in all.
The speaker stand for exclusive use was sold as the option.
The
stand for bolero piccolos had made in Japan [ to which the paint with a glow of
mat black was performed ], and made in [ which use MDF material ] Germany (two
kinds, piano black and a walnut) in the steel material like the stand for
boleros.
|
| System |
2 ways, 2 speaker bus reflex system, and a
book shelf type |
| Use unit |
For low-pass: 12.5cm corn type
For high
regions: 1.9cm dome shape |
| Frequency response |
60Hz - 19kHz |
| Crossover frequency |
3.5kHz |
| Sound pressure level |
90dB |
| The maximum input |
60W |
| Impedance |
4ohms |
| Dimensions |
Width 176x height 321x depth of 225mm
|
| Weight |
4.5kg |
| Option: Steel stand SSP-BK (2 sets [ 1 ], 60,000yen) |
| Dimensions |
Width 250x height 510x depth of 300mm
|
| Weight |
7kg |
| Option: Wooden stand SWB-BK/SWB-WN (2 sets [ 1 ], 120,000yen) |
| Dimensions |
Width 250x height 525x depth of 300mm
|
| Weight |
4kg |
| Finishing |
SWB-BK: Piano black
SWB-WN: Walnut
|
|
|
|