Features

E series Tallboy speaker system designed by Phil Jones.

20cm cone Woofer is carried.
The special paper cone is used for the diaphragm.

Two 11.4cm cone Midrange is carried.
This unit is aad's custom-made unit that uses a special high-tech cone material for the diaphragm. It has a special molecular structure that mixes aluminum and polypropylene.

2.5cm soft dome tweeter is carried.
The silk diaphragm is adopted as a diaphragm. In addition, a chamber with acoustic damping is provided at the back, and by combining this with the pole piece, the frequency response of the tweeter is made smoother.

Except for the woofer, it is magnetically shielded.

The network uses parts that are closely matched to the smallest error margin.
An air core coil is used for the inductor. This prevents the magnetic saturation which leads to distortion and the leak of amplifier output, even when playback volume becomes large.
Also, the printed circuit board is plated with 24 carat gold and has a high current specification.

The unit layout of the front baffle is laying out the middle and high frequency unit in the virtual coaxial type.
The enclosure uses a 15 mm thick MDF. In addition, we use specially designed wood cutters for production.
A lot of vibration absorbing materials are used inside the cabinet. This contributes to the sound with a sense of transparency.
The color of the appearance is maple.

Specifications

Type	3way 4speaker bass-reflex Tallboy type Magnetic shield design(woofer is nonmagnetic)
Unit	Low range:20cm corn Mid range:11.4cm corn x2 High range:2.5cm dome
Frequency Response	25Hz - 20kHz
Impedance	6ohm
Maxmam input	150W
Sound pressure level	90dB
Crossover frequency	120Hz, 3kHz
Dimensions	W125 x H1,075 x D300mm(Not including leg protrusions)
Weight	21kg