Technics SL-PG460
¥ 32,800 (around 1994)
Commentary
CD player using super 1-chip LSI.
The signal processing circuit is equipped with a super 1-chip LSI, and by integrating optical servo (focus, tracking, spindle), signal processing, and D/A conversion part into one chip, the signal path is shortened and noise is reduced.
In addition, a Mash 1-bit DAC is used for the D/A conversion section, and non-linear distortion such as 0 cross distortion is not generated in principle, thereby realizing high-fidelity D/A conversion.
It is equipped with a digital servo circuit and realizes stable drive by adjusting the servo amount according to the condition of each disk.
Equipped with a time edit function.
With this function, the tape can be divided into A side and B side according to the length of the tape.
It is equipped with a disk link function that can edit multiple disks.
Equipped with a peak search function, the recording level of the cassette deck can be easily adjusted.
Equipped with a synchroedit function, it can be combined with a cassette deck with a dedicated terminal to enable one button recording and simultaneous start.
Wireless remote control is included.
Model Rating
Type | CD Player |
Frequency characteristic | 2 Hz to 20 kHz ± 1 dB |
Dynamic range | 92 dB or more (EIAJ) |
Signal-to-noise ratio | 100 dB or more (EIAJ) |
Total harmonic distortion factor | 0.007% or less (EIAJ) |
Channel separation | 115 dB or more (EIAJ) |
Wow flutter | Below Measurement Limit (EIAJ) |
Headphone output level | Max. 15mW/32 Ω (variable) |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 10W |
External dimensions | Width 430x Height 103x Depth 287 mm |
Weight | 3.4kg |
Attachment | Wireless Remote Control |