Technics SE-9600
¥ 225,000 (around 1975)
Commentary
A stereo power amplifier that employs a constant voltage power supply drive for all circuits including the output stage.
Equipped with 3 types of protection circuits : power supply, current, and temperature.
Equipped with an output impedance 4-stage switching switch, an appropriate damping factor can be set according to the speaker.
Equipped with a peak output direct reading power meter equipped with 3-step range switching.
A radiator fin with a label is also used to inform the temperature change.
Model Rating
| Type | Stereo power amplifier |
| Effective power (1 kHz, both channel drive) |
165W + 165W (4 Ω) 110W + 110W (8 Ω) |
| Harmonic distortion factor | 0.08% |
| Cross modulation distortion factor | 0.08% |
| Output Bandwidth (8 ω) | 5 hz to 60 khz -3dB |
| Signal-to-noise ratio | 110dB |
| Residual noise | 0.3mV |
| Output impedance | 0.08 Ω (Normal), 0.8 Ω, 2.7 Ω, 8 Ω |
| Input Sensitivity / Impedance | 1V/40k Ω |
| External dimensions | Width 450x Height 193x Depth 426 mm |
| Weight | 23.6kg |