Technics SA-130
¥ 66,600 (around 1979)
Commentary
Multi-function receiver with built-in microphone mixing circuit with an upright see-through deck and microphone echo.
The deck is equipped with TPS (Automatic Tape Selection Mechanism), which is convenient when you want to listen to the song you just listened to again, or when you skip a song and listen to the next song.
Model Rating
| Type | FM/AM stereo cassette receiver |
| Amplifier Unit | |
| Effective output (both channel drive) | 16W + 16W (8 ohm, 40 hz to 20 khz) |
| Output bandwidth | 10 hz to 40 khz -3dB |
| Total harmonic distortion factor | 0.3% (at rated output) |
| Input Sensitivity / Impedance | Phono : 2.5mV/47k Ω Aux, Playback : 150mV/33k Ω |
| S/N ratio (IHF-A) | Phono:77dB Aux, Tuner, Playback : 77 dB |
| Frequency characteristic | Phono : RIAA standard curve ± 1 dB |
| FM Tuner Section | |
| Practical sensitivity | 1.2 μ V (75 Ω), 12.8 dBf (new IHF) |
| Total harmonic distortion factor | mono:0.2% |
| Signal-to-noise ratio | stereo:65dB |
| Frequency characteristic | 30 Hz ~ 15 kHz + 0.5 -1.5 dB |
| Effective selectivity | 60dB |
| Stereo separation | 43dB(1kHz) 35dB(10kHz) |
| <AM Tuner Section> | |
| Practical sensitivity | 300 μ V/m |
| Selectivity | 30dB |
| Cassette Deck Part | |
| Heads | Recording : Ultra High Permalloy Erasing : double gaps |
| Motor | Electronically controlled DC motor |
| Frequency response (regeneration) | 20 Hz ~ 14 kHz ± 2 dB (Normal) 20 Hz to 16 kHz ± 2 dB (XA) |
| Signal-to-noise ratio | 52dB(Normal) 57dB(XA) |
| Wow and flutter | 0.07%(W.R.M.S.) |
| <General> | |
| External dimensions | Width 567x Height 149x Depth 339 mm |
| Weight | 9.0kg |