SANSUI TU-22
¥ 41,800 (released in 1974)
Commentary
An FM/AM tuner that uses the latest audio technology and employs highly reliable ICs in each block stage for stability.
A dual-gate MOS-FET is used for the front-end section, making it an FM front-end with a 3-chip configuration.
Together with the precision finished frequency number line type varicon, it has excellent interference rejection capability and S/N ratio, and enables comfortable reception with less distortion even in weak radio waves.
The FM IF section is designed with a 2-element ceramic filter composed of 2 stages (4 elements), and the limiter characteristics are improved by using a proprietary IC.
Compared with conventional single-element devices, the characteristics are much more stable and improved.
A dedicated IC is used in the MPX section to ensure high stability.
A low-pass filter using a coil is also used to prevent beat interference, which is unique to FM stereo.
The AM tuner section uses a high-sensitivity large bar antenna and highly integrated AM dedicated ICs, and the IF section uses a Yaman type 2-element ceramic filter with excellent selectivity and sound quality. These features are designed with sound quality in mind.
The power supply uses a constant voltage circuit to eliminate ripple and voltage fluctuations.
Uses a 2-meter system consisting of a signal meter and a center tuning meter.
The front panel is equipped with an attenuator switch that can be used for FM reception in high-electric-field regions and high-sensitivity outdoor antennas.
It uses a display with a slightly inclined dial to improve visibility.
The frame is a zinc die-cast frame with a two color anodized aluminum finish in silver and black with letters and numbers left behind on the scale surface, plus LEDs for the pointer and stereo lamps.
Equipped with a discriminator output terminal to which a 4-channel adapter can be connected.
Equipped with an FM muting switch, noise between stations can be cut.
Model Rating
Type | FM/AM Tuner |
FM Tuner Section | |
Sensitivity | 2 μ V (IHF) |
Total harmonic distortion factor | Mono : 0.3% or less Stereo : not more than 0.4% |
Signal-to-noise ratio | 70 dB or more |
Separation | 40 dB or More (1 kHz) |
Selectivity | 60 dB or more |
Capture ratio | 2 dB or less |
Image ratio | 55 dB or More (83 MHz) |
IF Rejection | 80 dB or More (83 MHz) |
Spurious response rejection | 70 dB or More (83 MHz) |
Antenna input impedance | 300 Ω Balanced Type 75 Ω Unbalanced Type |
Frequency characteristic | 30 Hz to 15 kHz |
<AM Tuner Section> | |
Sensitivity | 53dB/m (bar antenna, 1 MHz) |
Selectivity | 30 dB or More (1 MHz ± 10 kHz) |
Image ratio | 80dB/m or more (1 MHz) |
IF Rejection | 80dB/m or more (1 MHz) |
<General> | |
Output voltage | 0.775V(FM100%MOD) |
Auxiliary circuit and equipment | FM attenuator Muting switch Discriminator terminal Two meter system 300 Ω / 75 Ω coaxial antenna terminal |
Rated power consumption | 9W |
External dimensions | Width 400x Height 120x Depth 240 mm |
Weight | 5.0kg |