SANSUI SP-150
¥ 23,900 (1 unit, around the early 1970 s)
¥ 28,800 (1 unit, around 1973)
Commentary
This 3-way speaker system fully expresses Sansui's sound creation policy by making full use of new technology.
A 25 cm cone type woofer is installed in the low range.
This unit uses a magnetic circuit with a large 12 cm ferrite magnet and 100% kraft pulp corn paper with high Young's modulus.
The middle area is equipped with a 12.5 cm cone type squaker.
The large back cavity prevents interference with the woofer and suppresses the generation of cross modulation distortion.
A horn type tweeter is installed in the high frequency range.
An e-type ferrite core with a large gap is used for the network, and DC resistance is kept to 0.3 Ω or less.
In addition, it has 3-step level control for middle and high sound.
The enclosure -density particle board is used for the enclosure, and it is a bass reflex system with ダンプド pipe duct.
The exterior has a walnut finish.
Model Rating
Method | 3-Way, 3-Speaker, Bass reflex system, Bookshelf Type |
Unit | For low band : 25 cm cone type For Medium Range : 12.5 cm Cone Type For High Frequency : 5 cm Horn Type |
Frequency characteristic | 30 Hz ~ 20 kHz (Normal Listening Room) 40 Hz ~ 20 kHz (Anechoic Room) |
Max Input | 40W |
Impedance | 8 Ω |
Sound pressure level | 92dB/W/m |
Crossover frequency | 700 Hz, 7 kHz (12dB/oct.) |
External dimensions | Width 367x Height 607x Depth 303 mm |
Weight | 17.5kg |