SANSUI SM-35
¥ 55,500 (released in 1963)
Commentary
FM/AM receiver equipped with FM multiplex circuit.
Built-in FM multi-stereo adapter allows you to enjoy FM stereo broadcast transmission (FCC method).
Built-in power amplifier with output of 32W.
It achieves almost flat characteristics from 30 hz to 70 khz.
The preamplifier section uses a transistor configuration with four transistors to reduce hum and noise.
A silicon diode is used for the power supply rectification circuit.
Built-in functions include a scratch filter, loudness circuit, tone control, AFC circuit, and tape monitor circuit.
Model Rating
| Type | Stereo integrated amplifier |
| Maximum power output | 16W+16W |
| Frequency characteristic | 30 Hz ~ 70 kHz ± 1 dB (8 Ω load) |
| Distortion factor | 1% or Less (at Output 13W) |
| Gain (input required for output 12W) | Phono MAG : 78 dB, 1.2 mV Phono X-TAL : 51.5 dB, 27 mV Tape, MIC : 76 dB, 1.6 mV Aux : 45 dB, 56 mV Tape mon in : 45 dB, 56 mV |
| Receiving frequency | FM : 76 MHz to 90 MHz AM : 535 kHz to 1605 kHz |
| Synchronous display | Using Magic Eye (for both AM and FM) |
| Accessory circuit | Loudness control Rumble filter Scratch filter Tape monitor terminal FM-AFC Headphone |
| Used vacuum tubes, etc. | Vacuum tube 6AQ8x3 6BE6x1 6BA6x4 6BM8x4 6GE12Ax1 Transistor 2SB51x4 Diode OA-81x10 (Germanium) SE-0. 5Ax2 (Silicon) Selenium rectifier TC-0.2Px1 |
| Power supply voltage | AC100V/110V/240V, 50Hz/60Hz |
| Power consumption | 120VA |
| External dimensions | Width 452x Height 148x Depth 325 mm |
| Weight | 14.4kg |