SANSUI MX-10
¥ 28,100 (around 1960 s)
Commentary
A professional mixer amplifier that can mix inputs of 6 circuits simultaneously.
You can mix three microphones, a player, a tape, or other inputs simultaneously.
DC ignition is adopted for the head amplifier part to prevent hum and noise.
In addition, a cathode follower system is used for the output circuit to prevent the inclusion of hum due to the extension of the cord.
Equipped with high-cut filter and low-cut filter.
Equipped with a VU meter.
Since the specified matching transformer (A-603, 50k Ω : 600k Ω) with MT9P type pin can be attached and detached freely, 2 types of microphones of high (50k Ω) and low (600 Ω) impedance types can be used.
Model Rating
Type | Mixer amplifier |
Frequency characteristic | 30 Hz to 15 kHz -1.5 dB or less 20 Hz to 20 kHz - Within 3.0 dB |
Gain | Mic1, 2, 3 : + 70 dB Tape head:+62dB Phono MAG:+53dB Phono X-tal:+41dB Aux:+10dB |
Signal-to-noise ratio | Mic1, 3, 3 : -50dB or more Tape head : -47dB or more Phono MAG : -50dB or more Phono X-tal : -50dB or more Aux : -55dB or more |
Distortion factor | Within 1% (Output 1 V, Mic) |
Output impedance | Cathode follower type low impedance |
Tone control | Low boost : + 16 dB at 50 Hz Low-cut : + 16 dB (50 Hz) High Boost : + 19 dB at 10 kHz High Cut : -12dB (10 kHz) |
Vacuum tube used | 12AX7 : 5 pieces 12AT7 : 1 Piece 6X4 : 1 Piece |
Power consumption | 40VA |
External dimensions | Width 444x Height 144x Depth 195 mm |
Weight | 6.4kg |