SANSUI AV-C10
¥ 49,800 (around 1986)
Commentary
An AV center equipped with surround and equalizer functions.
The Surround feature lets you choose between Theater Surround mode for movies and QS Surround mode for live, as well as Simulated Stereo mode for stereo mono sources.
Equipped with 2-channel amplifier.
This amp can be used either as a front or rear amp.
Equipped with a 5-band graphic equalizer.
Built-in RF converter.
Equipped with an audio insert switch, you can enjoy BGV (background visual), etc.
It has an external processor switch and can be connected to video processors, graphic equalizers, dbx units, PCM processors, etc.
Surround output terminal is mounted.
.jpg)
Model Rating
| Type | Audio and Video Center |
| Audio Characteristics | |
| Effective output / load impedance | 26W + 26W (8 ohm, EIAJ) |
| Total harmonic distortion factor | 0.02% |
| Input Sensitivity / Impedance | 200mV/47k Ω |
| Signal-to-noise ratio | 70dB |
| Frequency characteristic | 20 Hz to 100 kHz -3dB |
| Output Voltage / Impedance | 200mV/1k Ω |
| Maximum power output | 2.0V |
| Video Characteristics | |
| Video Input Sensitivity / Impedance | 1.0Vp-p/75 Ω |
| Video Output Level / Impedance | 1.0Vp-p/75 Ω |
| Audio Input Sensitivity / Impedance | -6dBs/47k Ω |
| Audio Output Level / Impedance | -6dBs/1k Ω |
| Frequency response (monitor output) | 20 Hz to 100 kHz -2dB |
| VHF output signal | ch 1/2 |
| Equalizer Characteristics | |
| Variable range | ± 12 dB |
| Center frequency | 100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz |
| <General> | |
| Pwer | 100 VAC, 50Hz/60Hz |
| Rated power consumption | 50W |
| External dimensions | Width 430x Height 76x Depth 259 mm |
| Weight (Body Only) | 4.5kg |
.jpg)