Audio Database
SOLO
Commentary

A speaker system designed by Phil Jones.

A 9 cm cone type woofer is installed in the low range.
In this unit, the rigidity is improved by pressing three ribs on the concentric circle of the diaphragm, and the piston motion stroke of 26 mm is realized with low distortion.
The voice coil uses OCC copper wire with a purity of 99.9999%.

A 2.5 cm metal dome type tweeter is installed in the high range.
The tweeter unit is equipped with a unique diffuser that greatly improves phase characteristics and directional characteristics, and a high heat radiation effect is obtained by filling the gap with magnetic fluid.
The voice coil uses OCC copper wire with a purity of 99.9999%, similar to the woofer.

The acoustic filter characteristic of the network section is 30dB/36dB.
In addition to the use of carefully selected parts, heat generated by the network is drained from the rear heat sink.

The enclosure incorporates 26 mm thick high-density fiberboard and 6 mm thick integrally molded die-cast rear baffles and top / bottom plates for excellent rigidity and damping.

The sound is tuned with the front grill attached, and the grill is non-detachable.
Also, there are 2 types of exterior, rosewood finish and wood grain black finish.

It is equipped with an extremely thick bolt mounting seat at the lower part of the body, and you can surely set the leg of 3 point support which is standard equipment and the stand sold separately.

Model Rating
Method 2-Way, 2-Speaker, Bass Reflex System, Bookshelf Type
Units, etc. For low band : 9 cm cone type
For high-pass : 2.5 cm dome type
Frequency characteristic 40 Hz to 20 kHz ± 2 dB
Sensitivity 84dB/W/m
Nominal impedance 6 Ω
Harmonic distortion factor Not more than 0.5%
Recommended amplifier output 100 Wrms to 200 Wrms
Crossover frequency 2.5kHz
Exterior finish Rosewood Finish, Wood Black Finish
External dimensions Width 208x Height 353x Depth 330 mm
Weight 12kg