Audio Database

PE-101
Commentary

This is a 10 cm cone type full-range unit that pursues sound quality with a well-balanced playback band and good positioning characteristic of full range.

The diaphragm uses a wet press cone with sufficient consideration of shape and material.
In addition, urethane foam edge with excellent linearity is used for the edge.

The balance of the vibration system is maintained by pulling out the lead wire symmetrically.

Uses highly rigid titanium for the center cap.

Aluminum die-cast frame is used for the frame.

By adopting a pure copper cap for the pole piece, current distortion generated in the magnetic circuit is reduced.

By adopting a perforated pole, the pressure in the magnetic circuit when the cone paper vibrates is reduced, and linearity in the low range is improved.

Magnet with 90 mm diameter is used for the magnetic circuit.

Model Rating
Type 10 cm cone type full range speaker
Impedance 8 Ω
Lowest resonance frequency (fo) 80Hz
Reproduction frequency characteristic Fo ~ 20 kHz
Max Input 30W (with recommended cabinet)
Rated input 15W (with recommended cabinet)
Output sound pressure level 90dB/W/m
Qo 0.5
Air gap total flux 47,900maxwell
Air gap magnetic flux density 9,900gauss
Equivalent mass 4gr
Effective vibration radius 45.5mm
Baffle opening 110 φ mm
Mounting Dimensions 124 φ mm
External dimensions Diameter 138x Depth 57 mm
Weight 1kg