Pioneer F-D3
¥ 25,000 (released in June 1999)
Commentary
FM/AM stereo tuner designed for easy enjoyment of AM stereo broadcast transmission
Equipped with AM stereo circuit.
In addition, it is equipped with an IF band switching circuit, so that the WIDE position with priority for sound quality can be switched under good reception conditions, and the NARROW position with priority for selectivity (forced mono interlock) can be switched when there is much noise, so that AM broadcasting can be enjoyed under the best conditions.
Equipped with a station memory function, up to 30 stations can be preset at random.
The character entry function allows you to enter the desired name (four letters of the alphabet) for each station.
It is equipped with a memory scan function, and you can receive preset broadcasting stations continuously for 5 seconds each.
Equipped with an RF attenuator, distortion can be improved by appropriately adjusting the input level when receiving strong FM radio waves.
The legs are equipped with a honeycomb insulator with excellent anti-vibration effect.
The rotary encoder enables quick channel selection.
Remote control terminal is mounted.
It is designed to save energy.
Model Rating
| Type | AM stereo capable FM/AM digital synthesizer tuner |
| FM Tuner Section | |
| Receiving frequency | 76 MHz to 90 MHz |
| Practical sensitivity | Mono : 14.2 dBf (1.4 μ V/75 Ω) |
| Signal-to-noise ratio | mono:76dB stereo:73dB |
| Harmonic distortion factor | mono:0.4%(1kHz) stereo:1.0%(1kHz) |
| Effective selectivity | 65 dB (± 400 kHz) |
| Stereo separation | 40dB(1kHz) |
| Frequency characteristic | 30 Hz to 15 kHz ± 1 dB |
| Image interference ratio | 50dB |
| IF interference ratio | 70dB |
| Antenna input | 75 Ω Unbalanced Type |
| <AM Tuner Section> | |
| Receiving frequency | 522 kHz to 1629 kHz |
| Practical sensitivity (attached loop antenna) | 350 μ V/m |
| Selectivity | 40 dB (Narrow) |
| Signal-to-noise ratio | 51dB |
| Image interference ratio | 40dB |
| IF interference ratio | 51dB |
| Antenna | Loop antenna (included) |
| AM Stereo Separation | 31dB |
| <General> | |
| Output Level / Impedance | FM : 650mV/1.5k Ω (100% modulation) AM : 200mV/1.5k Ω (30% modulation) |
| Power supply voltage | 100 VAC, 50Hz/60Hz |
| Power consumption (Electrical Appliance and Material Control Law) | 10W 1W (standby) |
| External dimensions | Width 420x Height 78x Depth 287 mm |
| Weight | 2.7kg |