Pioneer CS-X1
¥ 20,000 (1 unit, around 1972)
¥ 24,000 (1 unit, around 1977)
Commentary
A speaker system with a compact design that can be installed anywhere.
A 16 cm cone type woofer is installed in the low range.
This unit uses a magnetic circuit using a ferrite magnet with a diameter of 100 mm, a FB cone coated with a special damping material, and a special foamed urethane edge with excellent linearity, and realizes low-sound reproduction with a large scale despite its small size.
Also, by installing a pure copper cap on the center pole of the magnetic circuit, distortion caused by the magnetic circuit is reduced.
A 2.5 cm dome type tweeter is installed in the high range.
This unit uses a 30 μ - thick diaphragm made of ultra-hard duralumin, which, together with a front diffuser, improves frequency and directional characteristics.
The enclosure is completely sealed and 300g or more of sound-absorbing material is inserted inside to prevent resonance and standing waves.
The exterior is finished with Brazilian Rosewood oil.
Model Rating
Method | 2-Way, 2-Speaker, Airtight Type, Bookshelf Type |
Units Used | For low band : 16 cm cone type For high-pass : 2.5 cm dome type |
Impedance | 8 Ω |
Playback frequency band | 40 Hz to 20 kHz |
Output sound pressure level | 82.5dB/W/m |
Max Input | 40W |
Crossover frequency | 2kz |
External dimensions | Width 190x Height 297x Depth 210 mm |
Weight | 5.2kg |