Pioneer CS-E700
¥ 38,500 (1 unit, around 1973)
¥ 41,800 (1 unit, around 1974)
Commentary
A three way speaker system using a multi-seller horn.
A 30 cm cone type woofer is installed in the low range.
The cone paper uses FB cone produced by a unique manufacturing method, and the magnetic circuit uses large ferrite magnet to improve low-frequency characteristics with a loose design.
The mid-range has a 12 cm cone type mid-range.
This unit uses a FB cone and ferrite magnet similar to the woofer, and the rear part of the cone is completely sealed to prevent back pressure from the woofer.
A multi-celler-type horn type tweeter is installed in the high range, and the clear high range is reproduced with a wide range.
The front baffle is equipped with level control.
The enclosure is hermetically sealed, and the exterior features a walnut oil finish that takes advantage of natural wood.
Multi-amplifier terminal is also mounted on the input terminal on the back, and 2-way or 3-way multi-amplifier system is possible by switching the switch.
Model Rating
Method | 3-Way, 3-Speaker, Airtight Type, Bookshelf Type | ||||
Units Used | For low band : 30 cm cone type For Medium Range : 12 cm cone type For High Frequency : Horn Type |
||||
Impedance | 8 Ω | ||||
Playback frequency band | 35 Hz to 20 kHz | ||||
Output sound pressure level | 93.5dB/W | ||||
Max Input | 60W | ||||
Crossover frequency |
|
||||
External dimensions | Width 380x Height 660x Depth 300 mm | ||||
Weight | 16kg |