Audio Database

Image of the PD 335
Commentary

A CD player developed by inheriting the high sound quality concept and multi-functions of high-end machines.

It uses an 8-times oversampling digital filter to obtain low distortion audio characteristics with little phase rotation in the sound range around 20 khz.
In addition, channel separation is improved by the adoption of independent 18 bit direct linear conversion on the left and right sides.

A magnet clamp type stabilizer is used to suppress unnecessary vibration of the disk.
Since the disk rotates without contact with other mechanisms, unwanted vibrations are prevented from being transmitted to the pickup.

A honeycomb chassis with honeycomb-shaped ribs is adopted to increase rigidity, and excellent vibration damping characteristics are obtained by increasing structural strength.
In addition, by adopting a large insulator, external vibration is reduced.

It is equipped with a computer program edit function. If you specify the recording time of the tape, the microcomputer automatically selects the order of songs and determines the songs to be recorded on both A and B sides.

Equipped with a digital level control function that allows you to adjust the volume from your hand using a remote control.

Equipped with deck sync function for one touch tape editing (available on Pioneer's cassette deck with CD-DECK sync mark)

There was a side wood sold separately.

Model Rating
Type CD Player
Pick-up Three beam semiconductor laser system
Frequency Response (EIAJ) 4 Hz to 20 kHz ± 0.5 dB
Signal-to-noise ratio (EIAJ) 104 dB or more
Dynamic Range (EIAJ) 92 dB or more
Channel Separation (EIAJ) 100 dB or more
Wow & flutter (EIAJ) Measurement limit (± 0.001% W. PEAK) or less
Total Harmonic Distortion Factor (EIAJ) Not more than 0.005%
Output voltage 2.0V
Number of channels 2 channels (stereo)
Digital output Optical output : -15dBm ~ -20dBm (wavelength 660 nm)
Pwer 100 VAC, 50Hz/60Hz
Power consumption 10W
External dimensions Width 420x Height 98x Depth 324 mm
Weight 4.1kg
Attachment Remote control