Exclusive P10

Commentary

A high-end stereo player system announced around the same time as Exclusive P3.
As with the P3, in order to pursue the music quality thoroughly, the technical know-how was poured into it and each piece was hand-made.

EM-10 is used for the phono motor part.
The EM-10 uses a coreless, slotless structure linear torque hole motor that does not cause cocking, resulting in a strong starting torque (3kg-cm).
In addition, in order to obtain stable rotation, In addition, in order to obtain stable rotation, a balanced toy type SHR system (Stable hanging rotor) is used for the bearing structure to reduce side pressure applied to the bearing and lower the center of gravity of the rotating part, achieving an uneven rotation performance of 0.007% and a rotational speed accuracy of 0.002%.

EA-10 is used for the tone arm.
The EA-10 adopts a level variable type oil dump mechanism using reliable silicon oil, which improves traceability and greatly reduces intermodulation distortion that occurs during large amplitude reproduction in the low frequency range.
In addition, by rotating the adjustment ring, the damping is turned off so that the horizontal balance can be easily taken accurately.

In order to flatten the mechanical impedance of the tone arm, we repeatedly analyze and listen to the vibration mode of every part and use a straight tapered pipe made of carbon fiber that is integrated with the head shell. This reduces the vibration of each part in fine details and enables playback with stable sound quality from MM to MC.
To enable the use of commercially available head shells, it is also equipped with an S-shaped universal arm pipe so that it can be used with most cartridges.

The cabinet uses a non-resonant slit-type laminated solid board, and a low-center-of-gravity insulator, which is strong against howling and prevents unnecessary vibration for players, is installed from above inside the body.
In addition, it is finished with an Andes Rosewood natural wood finish and combined with a 5 mm thick smoked acrylic cloth for a simple design.

Model Rating

Type	Cartridgeless player system
Phono Motor Unit (EM-10)
Motor type	Linear torque DC hall motor
Bearing structure	SHR system
Drive system	Direct drive
Control system	Quartz PLL
Number of revolutions	33 1/3, 45 rpm
Speed accuracy	0.002%
Uneven rotation	0.007% (WRMS, FG Method) 0.015% (WRMS, JIS Record Method)
S/N	78dB(DIN-B)
Starting torque	3kg-cm
Load versus load characteristic	No change in rotational speed up to needle pressure of 540g
Start-up characteristic	0.9 sec
Turntable	31 cm aluminum low-pressure casting, weight 2.8 kg (including anti-vibration material)
Inertial mass	680kg-cm2(including motor rubber seat)
Tone Arm Unit (EA-10)
Type	Dynamic balance twin pipe replacement system Straight pipe with integrated head shell and S-shaped universal pipe
Effective arm length	282mm
Overhang	12.5mm
Tracking error	+ 1.85 °, -1.10 °
Needle pressure adjustment range	0 ~ 3g (0.1g step)
Applicable Cartridge Dead Weight	4g ~ 52g (weight exchange method)
Height adjustment range	+ / - 3 mm
Output code	With Low Impedance Gold-Plated Plug (oxygen-free copper Wire)
Base mounting part	Collet chuck system
Braking part	Low-frequency braking mechanism using silicon oil (Variable Damping Coefficient Method)
Attachment mechanism	Direct lever type anti-skating Silicone Oil Dump Type Arm Lifter
(Main Body)
Cabinet	Andes Rosewood natural wood Finish
Hood	5 mm Thick Acrylic Smoke Laminated Hood
HINGE	Fleece Top, Removable
Insulator	Coil spring and rubber insulator (low center of gravity structure)
Brake with quick stop	Electronic and mechanical combined brake
Operation button	Feather Touch, Short Stroke Push SW (Power Removal SW)
<Others>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	9W
External dimensions	Width 550x Height 245x Depth 415 mm
Weight	30kg